The worktable is equipped with two side and one back millimetric adjustable squares.
Two adjustable side blowing points.
Central front blowing point with adjustable height and air power.
Two sectors drum with internal suction adjusting on the power and on the line of suction to the point of tangency moved by a mechanic pump.
Millimetric regulation of the double sheet through mechanic locking adjustable horizontally and vertically.
Manual sheet feeding up to 20" inch. paper pile and automatic lifting through an engine.
Supplied with high and low stopping stroke and with automatic lifting and coming down device controlled by an optical photocell installed on the central arm to permit the regulation of the different paper sizes.
Maximum size of sheet up to 20" x 28" inch. Speed and tension of the dragging sheet carpet can be set.
Micrometric adjustable support square. Speed and tension of the sheet dragging carpet can be set.
The balls guide regulate the sheet; different types of balls (plastic or iron balls) are available depending on the paper thickness

Usable with 115LBS Cover up to 30PT Board stock
Three roll flood coat design it has the ability to run a wide array of different substrates
Fine adjustment capacity with a locking feature
Recirculation for the UV with a built in Heater 
Spring loaded rubber applicator roller (for double sheets)
Rubber wash up blade for easy clean up

Dual Lamp 5800 Watts Each
Controls intensity of lamp 1 and 2 in medium – and high +
HOUR METER Indicates time that the lamps has been functioning
AMPERIMETER
Based in our long experience we have designed this heaping tray which allows change its height  vertical angle ,horizontal angle  or graduate its lateral receiving width in this different positions
GUIDING WHEELS for heaping tray
Air bar for Delivery
Alarm System indicates if lamps are working or not
29” Width capacity
Band cover to protect from dust and debris.